▷Ways To Conduct Chlorination Of Old Mains Ocean Beach San Diego

How To Conduct Chlorination Of Old Mains In Ocean Beach San Diego?

Ways To Conduct Chlorination Of Old Mains Ocean Beach San Diego

Plumbing systems in commercial and industrial buildings are typically chlorinated when they’re first brought into service. Periodic chlorination of these systems is also conducted to control bacteria growth and maintain water quality. But what about chlorinating old mains?

There are a number of reasons why you might need to chlorinate an old main. Perhaps the system hasn’t been used in awhile and needs to be brought back into service. Or maybe you’re taking over a building that has an existing plumbing system and you want to ensure its cleanliness and safety.

In any case, chlorinating an old main is a process that should be done carefully and with great attention to detail. Here are some tips to help you get it right:

Make Sure The Main Is Empty Before You Start

This may seem like a no-brainer, but it’s important to make sure there’s no water left in the pipes before you start adding chlorine. Otherwise, you could end up with dangerous concentrations of chlorine in the water.

Use The Right Concentration Of Chlorine

When chlorinating an old main, you’ll need to use a higher concentration of chlorine than you would for a new system. A good rule of thumb is to use about 10 times the concentration that you would use for a new system.

Add The Chlorine Slowly

You’ll need to add the chlorine slowly to avoid shocking the system and causing damage. A good way to do this is to use a metering pump that can be set to add the chlorine at a slow, steady rate.

Flush The Main Thoroughly After Adding The Chlorine

Once you’ve added the chlorine, it’s important to flush the main thoroughly. This will help to remove any residual chlorine and ensure that it’s evenly distributed throughout the system.

Monitor The Chlorine Levels Closely

As you’re adding chlorine to the system, you’ll need to monitor the levels closely. You can do this with a simple test kit that you can purchase at your local hardware store.

Keep The Main Closed Off Until The Chlorine Levels Have Dropped

Once you’ve added the chlorine, it’s important to keep the main closed off until the chlorine levels have dropped to a safe level. This could take anywhere from 24 to 48 hours.

Ventilate The Area Well While The Chlorine Is Present

When chlorinating an old main, it’s important to ventilate the area well. Chlorine gas can be dangerous if inhaled, so you’ll want to make sure that the area is well-ventilated.

Use Personal Protective Equipment

When working with chlorine, it’s important to use personal protective equipment, such as gloves, goggles, and a respirator. This will help to protect you from the harmful effects of chlorine exposure.

Avoid Skin Contact With The Chlorine

It’s important to avoid skin contact with the chlorine when chlorinating an old main. If you do come into contact with it, be sure to wash the area thoroughly with soap and water.

Conclusion

Chlorinating an old main is a process that should be done carefully and with great attention to detail. For more information, contact Plumber Ocean Beach San Diego at (619) 432-4443.